- POWER SUPPLY

  230 V / 400 V +/- 15 % Star 3NPE (TN-S), 50/60 Hz with max. 90 A per phase.

  Star/Delta and single-phase supply upon request.

- POWER RATING

  Individual dimmers are suitable for continuous duty at their rated power of 3 kW or 5 kW.

  Max. load per cabinet is 60 kW at + 35° C ambiant temperature (air intake).

- TYPES OF LOAD 

  Hard-fired thyristors for control of 220/240 V

  Tungsten halogen lamps,

  Resistive and inductive loads,

  Transformer-fed low voltage lamps,

  Fluorescent lighting with suitable ballasts.

  Cold tungsten lamp allowed without damage to the thyristors.

  No minimum load required in switched mode.

  Special loads, such as HMI ballasts or electronic equipment, can be

  DMX-controlled by the DimSwitch function, which is a true Solid State Relay.

- CONTROL SIGNALS

  DMX512/1990 inputs.

  DMX512/1990 and/or Local Memories:

  Local memories are either played back simultaneously with the DMX signal on a HTP basis, or override the DMX signal.

  Optional dual DMX input, each with patch

- STANDARD CONFIGURATIONS

  24 x 3 kW ERACK 60/243MN/GE/DS

  12 x 5 kW  ERACK 60/125MN/GE/DS

- DYNAMIC EFFECTS

  5-key keypad, 12-character LED display and user friendly scrolling menu for easy access to all dimmer functions.

  Menu with different levels of access for different levels of users, protected against tampering.

  10 user-selectable dimmer laws: linear r.m.s voltage,linear r.m.s to 120 V, TV laws (BBC, TV1, TV2), DimSwitch, fluorescent, linear r.m.s voltage with preheating, square law.

  Voltage reduction factor for extended lamp life or variable load cable length compensation.

  Professional grade filtering (200 μs rise time).

  4000-step fade resolution, for noticeably smoother fades.

  Global or individual programming of dimmer law, patching, voltage reduction factor and smoothing.

  Creation and storage of 20 lighting cues (19 + Priority) each with fadeand wait times, for back-up cues, architectural lighting.

  Memories set by recording DMX levels or via the menu.

  After loss of DMX data: maintain last levels, or wait and fade to a memory or wait and fade to black.

  All programmed data saved for unlimited time.

  New DimSwitch technology, allowing control of circuit function: either dimming or real Solid State Relay.

- THERMAL SPECIFICATION

  Convection cooling via the lateral aluminium extrusions (heat sinks)

  and forced air cooling through two low noise, 12 V brushless DC fans with automatic ON-OFF switching.

- SAFETY SPECS

  Individual dimmer protection by MCB/1P+N (standard).

  Optional RCD+MCB (1P+N) - 30 mA - 6 kA individual dimmer protection.

  Optional RCD - 30 mA, 10 kA (1P+N) supply protection per group of 30 kW (12 x 3 kW or 6 x 5 kW).

  Optional main isolator switch 4P - 100 A.

  Protection circuitry against accidental 400 V wiring.

  Opto-isolated DMX input.

  Overtemperature protection through gradual dimmer fade-out.

  Cables, PCB’s and insulating materials with self-extinguishing properties according to UL 94v.0 standard

- COMPLIANCE

  This equipment complies with all applicable European directives and carries a CE mark.s

- PACKAGING

  Packing : 1150 x 685 x 265 mm

  Gross Weight : 48 kg

- WEIGHT / SIZE

  Net Weight : 43 kg

  Dimensions (W x D x H) : 1022 x 555 x 132 mm

- ACCESSORIES

  RCD - 30 mA (1P+N)

  Supply protection per group of 30 kW (12 x 3 kW or 6 x 5 kW) RCD30/ERACK

  Quantity: 2 per Eurorack 60

  RCD+MCB/1P+N per dimmer

  for 24 x 3 kW dimmers RCD+MCB/243

  for 12 x 5 kW dimmers RCD+MCB/125

  Stand-off brackets for 10 cm trunking space behind the rack ARC/ERACK

  Cable entry panel with 27 universal entry seals and a steel PG31 cable gland PANN.PG/ERACK

  Main isolator switch 4P - 100 A INP.SWITCH/ERACK

  Dual DMX input retrofit kit KIT/2DMX/ERACK

  Analogue input interface for architectural applications KIT/ANA/24

  Star/Delta power supply upon request